圆锥破碎机
关键词：四川遂宁圆锥破碎机四川遂宁矿山机械四川遂宁矿山设备
圆锥破碎机
本系列破碎机，适用于破碎中等以上硬度的各种矿石和岩石。具有结构可靠，生产效率高，调整方便，使用经济等特点。其弹簧保险系统是过载保护装置，可使异物铁块通过破碎腔而不危害机器，采用甘油或水两种密封形式，使石粉与润滑油隔离，保证可靠工作。破碎腔型式由矿石用途决定，标准型适用于中碎；中型适用于中细碎；短头型适用于细碎。
Cone Crusher
The crusher of this series suitable for crushing varies of mid-hard and above mid-hard ores and rocks. This construction,high prod uctivity, easy adjustment and less cost in operation. The sping release sytem of crusher acts an overload protection system that allows thamp to pass through the crushing chamber without damage to the crusher,use dry oil ,water,two kinds of sealed formation. It made plaster stone and engine oil separdted, assured reliable performance. The type of crushing chamber depend upon the sise feed and fineness of the crushed prodect .the standard type is applied to medium or fine crushing and the shorthead is applied to fine crushing.
规格与性能参数表Specification
|
型号 |
破碎锥直径 |
进料口尺寸 |
最大进料边长 |
出料口 |
处理 |
功率 |
偏心轴转速 |
重量 |
外形尺寸（长×宽×高） |
|
PYB600 |
Φ600 |
75 |
65 |
12-15 |
40 |
30 |
356 |
5 |
2234×1370×1675 |
|
PYD600 |
Φ600 |
40 |
35 |
3-13 |
12-23 |
30 |
356 |
5.5 |
2234×1370×1675 |
|
PYB900 |
Φ900 |
135 |
115 |
15-50 |
50-90 |
55 |
333 |
11.2 |
2692×1640×2350 |
|
PYZ |
Φ900 |
70 |
60 |
5-20 |
20-65 |
55 |
333 |
11.2 |
2692×1640×2350 |
|
PYD |
Φ900 |
50 |
50 |
3-13 |
15-50 |
55 |
300 |
11.3 |
2692×1640×2350 |
|
PYB1200 |
Φ1200 |
170 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790×1878×2844 |
|
PYZ1200 |
Φ1200 |
115 |
100 |
8-25 |
42-135 |
110 |
300 |
25 |
2790×1878×2844 |
|
PYD1200 |
Φ1200 |
60 |
50 |
3-15 |
18-105 |
110 |
245 |
25.3 |
2790×1878×2844 |
|
PYB1750 |
Φ1750 |
250 |
215 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3190×2894×3809 |
|
PYZ1750 |
Φ1750 |
215 |
185 |
10-30 |
115-320 |
160 |
245 |
50.3 |
3190×2894×3809 |
|
PYD1750 |
Φ1750 |
100 |
85 |
5-13 |
75-230 |
160 |
245 |
50.2 |
3190×2894×3809 |
|
PYB2200 |
Φ2200 |
350 |
300 |
30-60 |
590-1000 |
280/260 |
220 |
80 |
4622×3302×4470 |
|
PYZ2200 |
Φ2200 |
275 |
230 |
10-30 |
200-580 |
280/260 |
220 |
80 |
4622×3302×4470 |
|
PYD2200 |
Φ2200 |
130 |
100 |
5-15 |
120-340 |
280/260 |
220 |
81.4 |
4622×3302×4470 |
技术数据如有变动，恕不另行通知。Any change of technical data shall not be additionally（遂宁市连发机械厂）