反击式破碎机
关键词:遂宁击式破碎机遂宁矿山设备遂宁矿山机械
反击式破碎机
本产品能处理边长不超过500mm、抗压强度不超过350Mpa的各种粗、中、细物料(花岗石、石灰石、混凝土等),广泛应用于矿石破碎,铁路、高速公路和建筑行业人工砂石料的生产。
Impact Crusher
This series can deal with materials with feed size less than 500mm, and compressive resistance not more than 350Mpa despite of the large, medium or small size hard materials (granite, limestone, concrete). This machine is widely used in mining, highway and railroad, construction stuff and other relative industries and its capability is prior to the cone crusher and the hammer crusher.
性能特点:
结构独特、无键连接、高铬板锤、独特的反击衬板;硬岩破碎、高效节能;产品形状呈立方体,排料粒度大小可调,简化破碎流程。
Features:
Connected with locking sleeve assembly. The blow bar with high chrome.Hydraulic or hand opening.Impact plate with a special shape. Crushed product with cubical shape. Easy maintenance.Reliable operation.
工作原理:
该机是一种利用冲击能来破碎物料的破碎设备。当物料进入板锤作用区时,受到板锤的高速冲击使被破碎物不断被抛向安装在转子上方的反击装置上,然后又从反击衬板上弹回到板锤作用区重新被反击,物料由大到小在破碎腔内重复进行破碎。直到物料被破碎至所需粒度,由机器下部排出。
Operating Principle:
It is a kind of crushing equipment, using impact energy to crush materials. When materials get into the area where the board plays a part, under the impact function of board hammer at a high speed, the crushed ones are thrown to the impact device above the rotor continuously. And then they are rebounded from the impact liner to the area where the board hammer plays a part, and are impacted again. The materials from large to small get into the impact cavity for being crushed repeatedly. The process is going on until the materials are crushed to the required sizes and then discharged from down part of the machine.
规格与性能参数表 Specifications:
型号 |
规格 |
进料口尺寸 |
最大进料尺寸 |
处理能力 |
功率 |
重量 |
PF-1007 |
Φ1000Φ×700 |
400×730 |
250 |
15-60 |
37-55 |
9.5 |
PF-1010 |
Φ1000×1050 |
400×1080 |
300 |
50-90 |
55-75 |
14 |
PF-1210 |
Φ1250×1050 |
400×1080 |
300 |
70-130 |
110-132 |
17 |
PF-1214 |
Φ1250×1400 |
400×1430 |
300 |
90-180 |
132-160 |
22 |
PF-1315 |
Φ1320×1500 |
860×1520 |
350 |
120-250 |
180-260 |
26 |
PF-1320 |
Φ1320×2000 |
860×2030 |
500 |
160-350 |
300-375 |
30 |